Fisher PLC-XF10NL (Without Lens), PLC-XF10N Projector User Manual


 
9
Your projector uses nominal input voltages of 100-120 VAC. The projector
automatically selects the correct input voltage. The projector is designed to work
with single-phase power systems having a grounded neutral conductor. To reduce
the risk of electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure what type of
power is supplied to your building.
Connect the AC power supply cord
(supplied) to the projector.
The socket-outlet must be near this
equipment and must be easily
accessible.
INSTALLATION
POWER REQUIREMENTS
Projector side (Female)
AC outlet side (Male)