Fisher PLC-XU38 Projector User Manual


 
9
PREPARATION
POSITIONING PROJECTOR
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6
degrees.
Lift the front of the projector and pull FEET LOCK LATCHES
on the both sides of the projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to adjust the position and tilt.
2
To retract ADJUSTABLE FEET, lift the front of the projector
and pull and undo FEET LOCK LATCHES.
Keystone distortion of the projected image can be adjusted
by Menu Operation. (Refer to P20 and 35.)
3
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.
This projector is designed to project on a flat projection surface.
The projector can be focused from 3.0(0.9m) ~ 22.6(6.9m).
Refer to the figure below to adjust a screen size.
40”
100”
150”
200”
300”
249”
167”
124”
84”
34”
H1
H2
22.6' (6.9m)
15.1' (4.6m)
11.2' (3.4m)
7.5' (2.3m)
3.0'
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
(0.9m)
H1 : H2 = 9 : 1
Screen Size
(W x H) mm
Zoom (min)
40
Zoom (max)
813 x 610
3.6' (1.1m)
3.0' (0.9m)
100
2032 x 1524
8.9' (2.7m)
7.5' (2.3m)
150
3048 x 2286
13.5' (4.1m)
11.2' (3.4m)
200
4064 x 3048
18.0' (5.5m)
15.1' (4.6m)
300
6096 x 4572
–––––
22.6' (6.9m)
34"
691 x 518
3.0' (0.9m)
–––––