Fisher PLC-XW20A Projector User Manual


 
15
BEFORE OPERATION
Pull out Battery Holder.
Replace with new battery. Install
with battery (+),() marks properly.
Install battery and
Battery Holder into
Remote Control Unit.
BATTERY
LITHIUM BATTERY
CR2025 (3.0V)
(+) mark indicates
its (+) polarity.
Put Battery + mark
as shown direction.
BATTERY HOLDER
REMOTE CONTROL BATTERY INSTALLATION
To insure safe operation, please observe the following precautions :
Use only specified battery. Improper battery may cause malfunction of Remote Control Unit or improper
battery's installation may cause explosion.
Be sure to install battery with correct polarity.
Do not expose a battery to moisture or heat. Do not charge a battery.
If a battery have leaked on Remote Control Unit, carefully wipe the case clean and load a new battery.
Dispose used battery according to the battery-manufacturer's instructions.
Keep a battery away from children to avoid swallowing it accidentally.
1 2 3
30°
30°
Point Remote Control Unit toward projector (Receiver
Window) whenever pressing any button. Maximum
operating range for Remote Control Unit is about 16.4 (5m)
and 60° in front of the projector.
16.4
(5 m)
OPERATING RANGE