Filter
Top Products
Configuring authenticated access VPN authentication
FortiOS v3.0 MR7 User Authentication User Guide
01-30007-0347-20080828 57
2 Go to VPN > IPSec > Auto Key (IKE), select Create Phase 1 and enter the
following information.
Figure 28: Configure VPN IPSec dialup authentication
3 Select Advanced to reveal additional parameters and configure other VPN
gateway parameters as needed.
4 Select OK.
To configure user group authentication for dialup IPSec - CLI
config vpn ipsec phase1
edit <gateway_name>
set peertype dialup
set usrgrp <user_group_name>
end
Name Name for group of dialup users using the VPN for authentication.
Remote Gateway List of the types of remote gateways for VPN. Select Dialup User.
Authentication
Method
List of authentication methods available for users. Select
Preshared Key.
Peer Options Selection of peer ID options available. Select the user group that
is to be allowed access to the VPN. The listed user groups contain
only users with passwords on the FortiGate unit.
Note: The Accept peer ID in dialup group option does not support authentication of users
through an authentication server.
Note: Parameters specific to setting up the VPN itself are not shown here. For detailed
information, see the FortiGate IPSec VPN User Guide.