Filter
Top Products
15
This BOOKMAN book can send words
to certain other BOOKMAN books.
To send a word, you must first install a
book card in your BOOKMAN, and that
book card must be able to receive
words. To learn if a book card can send
or receive words, read its User’s Guide.
Note:
Speak English!
can only receive
International Phonetic Alphabet sym-
bols from other BOOKMAN books.
1. Highlight a word in this book.
You can highlight a word on the
Word List or use a highlighted word
in the text.
2. Hold
✩
and press
CARD
.
3. Highlight another book.
4. Press
ENTER
.
The word that you highlighted ap-
pears in the other book.
5. Press
ENTER
to look up the
word, if needed.
Resetting BOOKMAN
Sending Words Between Books
This unit may change operating modes
due to Electro-static Discharge. Normal
operation of this unit can be re-estab-
lished by pressing the reset key,
ON/OFF
, or
by removing/replacing batteries.
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases
settings and information entered into its
built-in book, and in an installed book card.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole near BOOKMAN’s
ON/OFF
key.
➤ Troubleshooting BOOKMAN
• Make sure your book card, if any, is
installed correctly.
• Check that the book card’s metal con-
tacts are dirt- and dust-free.