Filter
Top Products
7
3.1 Connecting the R526
When you press the power button:
•
The R526 comes on and the power LED lights up.
•
A solid green power LED of indicates that
the device is charged over 40%.
1. Turn on the R526 ensure your WiFi is enabled
on your PC or laptop. You can view your available
wireless networks by going through the control
panel, network connections or system tray
(lower right hand corner of your screen).
2. Select “FRANKLIN_R526 XXXX” as your
wireless network and enter the default
network key, “12345”.
Note.
: The last 4 digits, ‘XXXX’ of the SSID is the last four
digits of your MAC address.
You can nd the MAC address of your R526 on
the label under the battery.
3. Click Connect
4. Open your computer web browser and enter
http://10.10.10.254 into the address window
and press the Enter key.
3.2 Opening the Browser Interface
1. Open your Web browser and enter
http://10.10.10.254 into the address window.
2. Click Login button on the right top of the
browser. The below pop up message will
open to require administrative ID & Password.
The default ID and Password is admin/admin.
Type the administrative ID and password
into the Login box and click ok.