Filter
Top Products
3
Getting Started
To Install the Batteries
This unit uses 4 AAA batteries. You must insert the
batteries before getting started. The batteries should
be changed when the screen contrast is too light even
after adjustment. Please have a small Phillips screw-
driver at hand before you follow the steps below.
1. Turn the Spelling Ace over.
2. Unscrew the back cover and slide it off in
the indicated direction.
3. Install the new batteries following the mark-
ings in the compartment.
4. Replace the back cover.
To View a Demonstration
Unless disabled, a demonstration automatically ap-
pears when you turn on this unit.
1. Press ON/OFF.
2. To stop the demonstration, press CLEAR.
3. To disable the demonstration, type
✽✽
d,
and
then press ENTER.
4. To enable the demonstration, press CLEAR,
type
✽✽
d
, and then press
ENTER.
To Adjust the Screen Contrast
1. Press CLEAR.
2. Use or to lighten or darken the
screen.
▼
▼
▼