FrogPad USB Network Card User Manual


 
Note: the NumLock light and the Number light are on in this mode.
SPACE
Pressing <Space> by itself generates a space.
Press <Space> and any letter key simultaneously to
obtain the secondary bottom-left GREEN letter for
that key. The <F> and <A> keys have tab and
apostrophe, respectively. The <U> and <I> keys have
no secondary effect.
ENTER
Press <Enter> to Enter (to start a new line, paragraph,
execute an action, etc.). "Period" is located here too.
To access a Period, press both the <Enter> key and
the <Space> key at the same time.
Pressing <Space> simultaneously with <Symbol> or <Enter> will
generate a comma or a period, respectively.
Other letter-key actions (shifting, repeat, etc.) with <Space> are similar
to those without <Space>.
NUMBER
Press and release <Number> to activate the Keypad
Number Mode (aka NumLock). In this mode,
view the numbers and numeric symbols on the
bottom-edge of the key. You now have a 10-key
keypad. Pressing a number key with <Space> gets
the function keys (F1, F2, etc.). Press <Number>
to cancel the Keypad Number Mode.
FrogPad Manual
6
Default Setting
With all lights off the FrogPad is in the Letter Mode for lowercase
letters. Press and release any letter key to get the primary letter for the
key. Hold the key down and the letter repeats.
SHIFT
Press <Shift> ONCE to activate Temporary
Shift Mode. The Shift Light blinks to indicate
that CapsLock will be applied to the next letter.
Once the letter is entered, CapsLock will then
be cancelled (unless <Shift> is held down).
Press and hold <Shift> and press any sequence
of letters to get a series of capitalized letters.
(Temporary Shift Mode is still active and is
indicated by the blinking of the Shift light.)
If you want CapsLock press the <Shift> key TWICE (Shift
Light will remain on). To release CapsLock, press the <Shift>
key TWICE.
If you want ShiftLock press the <Shift> and <Space> keys
simultaneously. To release repeat this step.
The Shift Light blinks to indicate that <Shift> will be applied to the
next letter but that <Shift> will be turned off after that letter (unless
<Shift> is held down). It is on continuously to indicate that Shift Lock
is on; in this case, pressing <Shift> causes it to blink off & on periodically.
How to Frog
SYMBOL
Press <Symbol> to activate Symbol Mode. Press
the symbols on the right of each key with or without
<Space> to obtain symbols.
Press <Symbol> again to cancel Symbol Mode.
LHL Shown here
QUICK GUIDE!
FROGGY'S
NOTE: When referring to both Left & Right Layouts,
highlighted Commands will be in <RED> .
The Basics
NOTE: The <GUI> Key is the same as: WIN,
APPLE
LHL Shown here
..
CapsLock