Filter
Top Products
User’s Guide for Modem Charging Cradle PS6PMCM 7
Configuring the Network Manager for Modem
Communication
Perform the following steps:
1. Create a Point-to-Point Protocol (PPP) connection with a remote
computer by doing these steps:
• On the remote computer, create a connection that will accept
incoming connections.
• Set the incoming connection device to PC Modem.
• Verify that both, user information and permissions are correct.
• Ensure that the incoming connection has a properly assigned
IP address.
2. Configure the Palm Tungsten E2 to work with the Modem
Charging Cradle:
• Open Preferences from the Palm OS Main Menu.
• Select Communication Connection.
• Create a new connection using these settings:
− Name: Custom
− Connect to: Modem
− Via: Cradle/Cable
• Select OK to save the new connection
• Open Preferences from the Palm OS Main Menu
• Select Communication Network then insert these settings:
− Service: PSINet
− User Name: <Enter PC User’s Name> who’s being
connected
− Password: <Enter same PC User’s Password>
− Connection: Custom
− Phone: <Enter Phone Number of Remote PC>