Filter
Top Products
10 A26361-K1063-Z121-1-7619, edition 1
Connecting the monitor
!
Observe the "Safety notes" in the "Important notes" chapter in this operating manual.
CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled out!
► Be sure that the monitor and the computer are switched off.
Connecting cables to the monitor
123 4 5
1 = Security slot for "Kensington Lock"
2 = Power connector
3 = DVI-D connector
(only for monitors with digital input)
4 = D-SUB connector (ANALOG)
5 = AUDIO-IN connector
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
► Select the suitable data cable for your computer.
Digital graphics card with DVI interface: DVI connector (only for monitors with digital
input)
Graphics card with VGA interface: D-SUB connector
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
► Connect one of the connectors of the data cable to the D-SUB connector (4) or the DVI-D
connector (3) on the monitor and secure the plug-in connection by tightening the safety screws.
i
The monitor automatically detects the input when only one signal source is connected.