Fujitsu AP-600RP-USB Computer Drive User Manual


  Open as PDF
of 6
 
Inform WLAN AP-600RP-USB Configuration schemes Issue October 16
th
2003
Page 2 of 6
3. AP-600RP-USB with ADSL Router
( 1 ) ADSL Router ( 2 ) AP-600RP-USB ( 3 ) Notebook
WAN: PPPoE over ADSL
LAN: static IP: 192.168.1.1
DHCP on: 192.168.1.10 - 90
GW: 192.168.1.1
DNS: auto
WAN: no ISP
LAN: static IP: 192.168.1.254
DHCP disabled
Routing: off (cable from Router
connected to the LAN
interface)
SSID: CONNECT2AIR
TCP/IP: get IP and DNS
address
automatically
SSID: CONNECT2AIR
Data Rate: auto
Connecting the devices to the AP-600RP-USB:
Connect the ADSL Router to one of the LAN port, not to the WAN port. Additional networking devices like network
printers, servers or scanners can be plugged to one of the free LAN ports and will be integrated in the IP segment of
192.168.1.X.
Installation Note
The AccessPoint as well as the ADSL Router have routing capabilities. Therefore it is suggested to operate the
AccessPoint only as a Wireless Bridge. Connecting the ADSL Router to one of the LAN ports will put the AccessPoint
into the bridging mode. The network management will therefore be handled by the ADSL Router.
ADSL Router:
- DHCP Server
- managing the PPPoE session
AP-600RP-USB:
- handling the wireless LAN (WLAN) access
2
1
3
4
4
1
X
3
 previous next