Filter
Top Products
Getting s tarted
1 2 3 4
1 = Power c onnector
2 = AUDIO-IN socket
3 = DVI-D socket (DVI)
4 = D-SUB socket (VGA)
► Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of
the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engage d.
► Plug the powe
r cable supplied into the power connector of the monitor.
► Secure the cover over the connections.
A lock (Kensington Lock) can be mo unted in the security s lot to protect the monitor
from theft. A K ensington Lock is not included with the monitor at delivery.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
► Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the safety screws.
► Insert the other plug of the audio cable in the audio output of the computer.
► Plug the power connector of the monitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and sep arate
graphics card), the monitor port for the separate graphics card is active as standard.
12 A26361-K1333-Z220-1-7619, edition 1