Filter
Top Products
4
The information in the Release Notices SYSFGM.BS2OSD.060.E and
SYSFGM.BS2XC.021.E with the functional enhancements with correction
package 1/2007 must be noted.
These Release Notices contain the basic information for OSD/XC
2.2A.
This Release Notice describes additional information and functional
enhancements.
All BS2000 product Release Notices are available in the Internet
under the following URL:
http://manuals.fujitsu-siemens.com
If one or more previous versions are skipped when this
version is used, the information from Release Notices
(and README files) of the previous versions must be noted.
1.1 Ordering
OSD/XC V2.2A can be ordered from your local distributors.
This software product is subject to the general terms and condi-
tions of the software product use and service agreement and is pro-
vided to you against regular or one-time payment.
1.2 Requirement
The X2000 Carrier System V3.0A07 is a basic requirement for OSD/XC
V2.2A
1.3 Delivery
The products of the OSD Extended Configuration (XC products) are
supplied on CD-ROM in SOLIS/IMON format.
These are as follows:
- SETUP OSD/XC (executable BS2000-EXEC as disk image)
- OSDXC(1-3) (XC products in SOLIS/IMON format)
- UPDATE OSD/XC (corrections for the XC products)
- ADDON (separately ordered user software)
When supplied with new SX hardware, the BS2000/OSD-BC V6.0B operat-
ing system base of OSD/XC V2.2A is delivered in the form of a pub-
set with IPL capability that is preinstalled on an internal hard
disk of the SX server. This installation serves as a standby sys-
tem.
The productive customer system is also preinstalled at the works on
SX100 series servers.
On SX130, SX140 and SX150 series servers, the complete OSD Extended
Configuration of the software configuration should be set up for
productive customer operation on external RAID disk systems that
are connected to the SX server via fibre channel or ESCON channels.
First-Installation is made by copying the standby system with the
BS2000 "COPYPUB" procedure that is stored in the PLAM library
"SYSPRC.MAKEPUB.150".
The X2000 Carrier System V3.0 with Solaris V8 as its operating sys-
tem base serves as the hardware abstraction layer for OSD/XC V2.2A.
X2000 is not part of OSD/XC V2.2A, it is delivered with the SX
server.