Fujitsu D1931 Computer Hardware User Manual


 
A26361-D1931-Z120-1-7419, Edition 1 English - 9
Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.
External ports
The positions of the external ports are shown on page "Cover".
PS/2 keyboard port, purple
Audio input (Line in), light blue
Serial interface, turquoise
PS/2 mouse port, green
Monitor port, blue
Parallel port/Printer, burgundy
LAN
LAN connector (optional)
USB - Universal Serial Bus, black
Audio output (Line out), light green
Microphone jack (mono), pink
LAN connector
The mainboard is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN
controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller
supports the WOL functionality through Magic Packet
TM
.
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and
Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
2
1
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights up differently depending on the transfer rate:
10 Mbit/s off
100 Mbit/s green
1000 Mbit/s yellow