Fujitsu D1961 Computer Hardware User Manual


 
BIOS Recovery - Recovering System BIOS
A26361-D1961-Z120-1-7419, edition 2 English - 25
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
Open the casing as described in the operating manual.
Set the switch for "Restore system BIOS" to
ON.
Close the casing as described in the operating manual.
Insert a BIOS update floppy disk and start the PC.
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
Open the casing as described in the operating manual.
Set the switch for "Restore system BIOS" to
OFF.
Close the casing as described in the operating manual.
Remove the floppy disk from the drive.
Start the PC and invoke
BIOS Setup.
Select the menu item
Reset Configuration in the menu Advanced and change the setting to Yes.
Save the change and terminate
BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).