Fujitsu FTP-622DCL001/011 Printer Accessories User Manual


 
2
FTP-622DCL/DSL
SPECIFICATION
Item Specification
Data receive speed 19200, 9600, 4800, 1200 bps (set by dip switch)
Synchronous method Asynchronous, full duplex
Hand shake DTR/DSR signal or XON/XOFF
Input output level RS232C
Signal level
Space (logic = 0) +3 V ~ +12 V
Mark (logic = 0) –3 V ~ –12 V
(1) Connector (CN2)
Part number : B6B-XH-A (J.S.T)
Mating connector part number : XHP-6 (J.S.T) or equivalent
No. Signal I/O Contents No. Signal I/O Contents
1 FG Frame GND 2 RD I Receive data
3 TD O Transmission Data 4 DTR O Data terminal ready
5 GND Signal GND 6 DSR I Data set ready
(3) Pin number
B6B-XH-A (J.S.T)
(2) Pin assignment
2. SERIAL INTERFACE (RS232C)
Notes: “I” or “O” means a signal direction from the interface board side.
61
CN2
CN1
tcudorPrebmuNtraPnoitcnuF
draoBecafretnIlellaraP
100LCD226-PTF)rettuctuohtiw(dradnatS
110LCD226-PTFlortnocrettuchtiW
draoBecafretnIlaireS
100LSD226-PTF)rettuctuohtiw(dradnatS
110LSD226-PTFrellortnocrettuchtiW
210LSD226-PTFMORHSALF+rellortnocrettuchtiW
211LSD226-PTFMORHSALF+IJNAK+rettuChtiW