Filter
Top Products
4
FTP-628MCL401/451
11
7.5
(54)
13.9
13.1
42.2
21.8
10.7
5.4
81.2
platen center
printer position standard
platen unit
paper exhaust position
lever
platen unit
paper
printer
cutting position
n FuNCTiON OF iNTerFaCe bOard
n diMeNsiONs
1.Printermechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specied).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-628MCL401
Item Item
1.
Test print function 8. Cutter trouble detect
2. Paper out detection 9. Motor power saving function
3. Paper near end detection 10. Mark detection function
4. Platen open detection 11. MCU operation abnormality detection
5. Thermal head temperature abnormality detection 12. Power ON/OFF sequence protection
6. Blow-out fuse detection 13. Motor over-current protection
7. Head voltage abnormality detection 14. Hardware timer