Filter
Top Products
3
FTP-629MCL054/353/354-R
For head
24 VDC ±5% 1.4A (3A)
(24V , 25% printing ratio)
For printer motor 24VDC±5% 1A maximum
For cutter motor --- 24VDC±5% 1.2 A maximum
For logic 5VDC±5% 0.2 A maximum
Printer Mechanism 82.2
× 40.5 × 20.5 mm ---
Dimensions
Wx D x H Printer Mechanism
w/cutter --- 90.6 × 62.5 × 37.7mm
Interface board
(standard) 70 × 60 × 24mm
Interface board
(hi speed) 95.1 x 73.6 x 18.6mm
Interface board 77 x 50x 215mm
Weight Printer mechanism Approximately 110g ---
Printer mechanism
w/cutter --- Approximately 270g
Interface board
(standard) Approximately 30g
Interface board
(hi speed) Approximately 45g
Interface
Approximately 22g
Life Head Pulse durability: 1
× 10
8
pulse/dot (using Fujitsu Components' standard driving method)
Wear resistance: 100 km (at 12.5% print ratio)
Cutter --- 500,000 cuts min.
Operating temperature -25˚C to +70°C (Guarantee) -10˚C to +55°C (Guarantee)
Environmental
conditions Operating humidity 20 to 85% RH (no condensation)
Storage temperature –40°C to +85°C (excluding paper) –20°C to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-020P0104 (58mm),
PD150R (Oji paper), FTP-020P020P0701 (58mm)
Medium term paper TP60KS-F1 (Nippon paper),FTP-020P0102(58mm),
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
SpecicationsItem
Part number FTP-629MCL054R FTP-629MCL353/354-R
Interfaces Centronics / RS-232C standard / USB
Power
supply
Recommended
thermal sensitive
paper