Fujitsu FTP-632MCL302 Printer User Manual


 
2
FTP-632MCL301/302
NOT FOR NEW
DESIGN
Part number FTP-632MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
MCL301 80 mm
Paper width
MCL302 85 mm
Paper thickness 60~100 µm*
1
Cutting type full or partial
Number of columns 48 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types
JIS KANJI (FTP-622DCL101/111): approximately 6800
24 × 12 dots, (3.0 × 1.5 mm), 48 columns
24 × 24 dots, (3.0 × 3.0 mm), 24 columns
16 × 8 dots, (2.0 × 1.0 mm), 72 columns
16 × 16 dots, (2.0 × 2.0 mm), 36 columns
DESIGNATION
Part number
With Auto cutter
FTP-632MCL301/302
*1
FTP-622DCL011/111
*2
FTP-622DSL011/012
*3
FTP-622CU101
*4
Item
Printer mechanism
Interface board
GENERAL SPECIFICATIONS
SpecificationsItem
Character composition, dimensions (H×W),
Number of characters
(Continued)
Centronics Standard with Auto cutter
Serial (RS-232C)
LSI(MCU)
*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear
paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK + Kanji.
*3: 012 supports ANK and 111 supports ANK + Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.