Fujitsu FTP-634MCL002 Printer User Manual


 
FTP-634MCL001/002/FTP-624DCL/DSL002
3
(Continued)
*1: There may be exceptions.
*2: Guarantee +5°C to +40°C.
SpecificationsItem
Power
supply
Environmental
conditions
For head
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)
For motor
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approximately 0.8 A (conditions: room temperature, 7.2VDC)
For logic
Voltage: 5 V DC± 5%
Current: 0.2 A maximum
Mechanism 108 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)
Dimensions
Interface board 131 (W) × 89(D) × 24 (H) mm
Weight (Mechanism) approximately 95 g
Expected life Mechanism Pulse durability: 1 × 10
8
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 12.5% print ratio)
Operating temperature 0 to +50°C*
2
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (80 mm width) : FTP-030PU001
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030PG106
Recommended thermal sensitive paper
In Europe (80 mm width) : FTP031P0060-45
· Oji Paper : PD160R, PD170R, PD150R
· NIPPON Paper : TF50KS-E4, TF60KS-E, TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235