Filter
Top Products
3
n
*+5˚C to +40˚C printing density assurance rance.
Item Specication
Interface Conforms to RS232C/Centronics
Power
supply
For print
head
MCL401 24 VDC average current, 0.7A (1.3A peak)
MCL601 24 VDC average current, 1.3A (2.5 A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
For motor 24 VDC ±5%, 1.0 A maximum
For cutter MCL401 24 VDC ±5%, 1.1 A maximum
MCL601 24 VDC ±5%, 1.3 A maximum
For logic 3.3 to 5.25 VDC, 0.2 A maximum
Dimensions Mechanism with cutter 104.5 x 42.2 x 21.8 mm (WxDxH)
Interface
board
DSL291 70 x 60 x 12 mm (WxDxH)
DSL6xx 95 x 70 x 21.6 mm (WxDxH)
Weight Mechanism with cutter Approximately 118g/122g
Interface board Approximately 50g / 50g
Life Head MCL401 Pulse durability: 50 million pulses/dot (print ratio: 12.5% or less).
MCL601 Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less).
MCL401 Abrasion resistance: paper traveling distance 50km
MCL601 Abrasion resistance: paper feed length 100km.
Cutter MCL401 500,000 cuts
MCL601 1,000,000 cuts
Platen 5,000 times (open/close)
Operating
environment
Operating temperature* 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC (paper not included)
Storage humidity 5 to 95% RH (no condensation)
Detection
function
Head temperature
detection
Detected by thermistor
Paper out/mark
detection
Detected by photo-interruptor
Platen release Detected by sliding switch
Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD150R (Oji paper)
FTP-020PU701 (58mm)
Medium life paper TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
Long life paper PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)