Filter
Top Products
3
FTP-639MCL103/383-R
(Continued)
Item Specications
Part number FTP-639MCL103/105-R FTP-639MCL383#01/#02-R
Power supply For head 24 VDC ±5%, 1.9A (4A) (24V, 25% printing ratio)
For printer motor 24 VDC ±5% 1A maximum
For cutter motor --- 24 VDC ±5% 1A maximum
For logic 5 VDC ±5% 0.2A maximum
Dimension
W x D x H
Printer mechanism 104.2 x 40.2 x 20.5mm ---
Printer mechanism with cutter --- 112.5 x 70.3 x 37.4mm
Interface board (DCL/DSL) 70 x 60 x 21.6mm
Interface board (DSL100) 95 x 73.5 x 11.6mm
Interface board (DSL300) 77 x 50 x 21.5mm
Weight Printer mechanism Approximately 125g ---
Printer mechanism with cutter --- Approximately 350g
Interface board (std) Approximately 25g
Interface board (medium speed) Approximately 45g
Interface board (high speed) Approximately 20g
Life Head Pulse durability: 100M pulse/dot (using Fujitsu's standard driving
method)
Wear resistance: 100km (at 12.5% print ratio)
Cutter --- 1,00,000 cuts minimum
Platen 5,000 times (open/close)
Environmental
conditions
Operating temperature -10ºC to +60ºC (guarantee) 0ºC to +50ºC (guarantee)
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -40ºC to +70ºC -20ºC to +60ºC
Storage humidity 5 to 95% RH (no condensation)
Detection Head temperature By thermistor
Paper out/Mark detect By photointerruptor
Head release By slide switch
Recommended
thermal
sensitive paper
High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E2 (Nippon paper), FTP-030P0104 (80mm)
PD150R (Oji paper), FTP-030P0701 (80mm)
Medium life storage paper TF60KS-F1 (Nippon paper), FTP-030P0102 (80mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long life storage paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)