Fujitsu FTP-641MCL201 Printer User Manual


 
2
FTP-641MCL201/202
Printing method Thermal-sensitive line dot method
Dot structure 864 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 108 mm
Number of columns 72 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dotlines/s (100 mm/s) maximum
JIS ANK : 128 International characters : 130
Character types Semi-graphic : 63 ASCII small characters : 31
Download : 384
24 × 12 dots, (3.0 × 1.5 mm), 72 columns
32 × 16 dots, (4.0 × 2.0 mm), 54 columns
24 × 24 dots, (3.0 × 3.0 mm), 36 columns
32 × 32 dots, (4.0 × 4.0 mm), 27 columns
Interface 1) Centronics standard 2) Bus interface*
1
24 VDC ± 5%, average:*
2
0.82 (1.11) A (at 25 mm/s printing speed, 25% printing ratio)
For head 1.25 (1.66) A (at 50 mm/s printing speed, 25% printing ratio)
2.42 (3.25) A (at 100 mm/s printing speed, 25% printing ratio)
( ): Peak
For motor 24 VDC ± 5%, 1.0 A maximum
For logic 5 VDC ± 5%, 0.5 A maximum
Weight Mechanism: approximately 290 g. Interface board: approximately 100 g
Mechanism 159 (W) × 48 (D) × 28.0 (H) mm (excluding connector)
Interface board 140 (W) × 89 (D) × 24.0 (H) mm
DESIGNATION
Part number
Front paper insertion type
Rear paper insertion type
FTP-641MCL201
FTP-641MCL202
FTP-621DCL003
FTP-621CU102
FTP-633GA101
Item
Printer mechanism
Interface board
Micro Controller Unit
Gate Array
LSI
GENERAL SPECIFICATIONS
SpecificationsItem
Power supply
Character composition, dimensions (H×W),
Number of columns (standard)
(Continued)
Dimensions