Filter
Top Products
3
FTP-641MCL351/352
24 VDC ± 5%, average:*
2
0.82 (1.11) A (at 25 mm/s printing speed, 25% printing ratio)
For head 1.25 (1.66) A (at 50 mm/s printing speed, 25% printing ratio)
4.75 (6.30) A (at 50 mm/s printing speed, 100% printing ratio)
( ): Peak
For motor 24 VDC ± 5%, 1.0 A maximum
For logic 5 VDC ± 5%, 0.5 A maximum
Weight Mechanism with cutter: approximately 610 g
Interface board: approximately 100 g
Mechanism + cutter 159 (W) × 60 (D) × 71.0 (H) mm (excluding connector)
Interface board 140 (W) × 89 (D) × 24.0 (H) mm
Pulse durability : 5 × 10
7
pulse/dot (using Fujitsu & Takamisawa's
standard driving method)
Wear resistance : 50 km (at 12.5% printing ratio)
Cutter Cutting life: 3 × 10
5
times
Operating temperature +5 to +40°C*
3
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter (command set)
Head-up By microswitch
Paper width 114 mm
1 ply paper in roll : FTP-040P0020
SpecificationsItem
(Continued)
Power supply
Dimensions
Thermal head
Life
Environmental
conditions
Recommended thermal sensitive
paper*
4
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
+0
–1