Fujitsu FTP-642MCL302 Printer User Manual


 
2
DESIGNATION
Part number
Standard
With Auto cutter
FTP-642MCL001/002
*2
FTP-642MCL301/302
*3
FTP-622DCL001/011
*4
FTP-622DSL001/011
*5
FTP-622CU101
*6
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Item
Printer mechanism
Interface board
GENERAL SPECIFICATIONS
(Continued)
Centronics Standard
Serial (RS-232C)
Thermal head cable
Parallel (centronics) Interface cable
Serial (RS-232C) Interface cable
Power cable
LSI(MCU)
*2: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).
*3: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path).
*4: 001 /011 supports ANK and 101 supports ANK + Kanji (pages 98-103).
*5: 001/011/012 supports ANK and 111 supports ANK + Kanji (pages 98-103).
*6: CU101 supports Kanji and cutter control.
Part number FTP-642MCL001/002 FTP-642MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 832 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dot/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dot/mm)—Line feed pitch
Effective printing area 104 mm
MCL001/301 112 mm
Paper width
MCL002/302 114 mm
Paper thickness 60~100 µm*
1
60~100 µm*
1
Cutting type ----------- full or partial
Number of columns 69 columns/line (24×12 dot font)
Maximum printing speed 640 dot line/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types
JIS KANJI (FTP-622DCL101/111): approx.6800
24 × 12 dots, (3.0 × 1.5 mm), 69 columns
24 × 24 dots, (3.0 × 3.0 mm), 34 columns
16 × 8 dots, (2.0 × 1.0 mm), 104 columns
16 × 16 dots, (2.0 × 2.0 mm), 54 columns
SpecificationsItem
Character composition, dimensions (H×W),
Number of characters
Cables