Filter
Top Products
FTP-644MCL001/002/FTP-624DCL/DSL002
3
For head
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)
For motor
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 0.8 A (conditions: room temp., 7.2 VDC)
For logic
Voltage: 5 VDC ± 5%
Current: 0.2 A maximum
Mechanism 138 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)
Dimensions
Interface board 131 (W) × 89(D) × 24 (H) mm
Weight (Mechanism) approximately 125 g
Expected life Mechanism Pulse durability: 1 × 10
8
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 12.5% print ratio)
Operating temperature 0 to +50°C*
2
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (112 mm width) : FTP-040PU001, FTP-040PG021
For rear insertion use (114 mm width) : FTP-040P0020, FTP-040PG106
Recommended thermal sensitive paper
In Europe (112 mm width) :FTP-041P0060-45
· Oji Paper : PD160R, PD170R, PD150R
· NIPPON Paper : TF50KS-E4, TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
SpecificationsItem
(Continued)
Power
supply
Environmental
conditions
*1: There may be exceptions.
*2: Guarantee +5°C to +40°C.