Fujitsu GranPower7000 (GP 7000F) Computer Hardware User Manual


 
2.3 Systemboard
2.3 Systemboard
Systemboard layout
CPU module slots, memory module slots, and PCI slots are located on the Systemboard as described
in Figure 2.4 .
NVRAM
SCF BOARD ONLY
PCI Slot #6
PCI Slot #5
PCI Slot #4
PCI Slot #3
PCI Slot #2
PCI Slot #1
DDC #3
DDC #2
DDC #1
CPU #1
CPU #0
DDC #0
MEMORY SLOT
#0
#13
#12
#9
#8
#5
#4
#1
#2
#15
#14
#11
#10
#7
#6
#3
PC LAN KB
Serials Parallel
Figure 2.4 Systemboard Layout of M200
Processor Configuration
Up to 2 processors can be installed in the M200 main cabinet. When installing the processor
modules, the following conditions must be satisfied:
The installed processor modules must be the same type (including the cache size).
Install a processor module in slot 0 before installing one in slot 1.
When installing a processor module, install DC-DC converters along with the processor in the
corresponding slot.
IMPORTANT
If any of the above conditions is not satisfied, the operation is not guaranteed.
19