Filter
Top Products
Desktop Keyboards – Notebook Keyboards – Mice – Embedded Pointing Devices
Touch Panels – Keyboard Video Mouse Switches
Please note that this information may be subject to change
Created August 2002
Title :-SERVIS 2 Port ATL KVM Switch Specification.doc Issue 4.0
With our products we
always look to the future.
█
FEATURES
█
SPECIFICATION DETAILS
Item Specification
Console Ports
2x 6 Pin Mini-Din female Mouse/Keyboard ports, (front), D-SUB 15 pin female monitor port (rear)
PC Ports
2 x 6 Pin Mini-Din female Mouse/Keyboard ports, 2 x D-SUB 15 pin female monitor ports
Additional Ports
2 Series B female USB ports
Front Hub ports
2 Series ‘A’ female ports at 500mA per port
Monitor Resolution/Bandwidth
1600 x 1200 200MHz
Power Supply
DC +5V ±5% (Supplied via the Mouse and keyboard port of the host PC for PS/2 only connection)
External Power Supply
DC +5V ±5% (Supplied via the external DC adapter)
Current Consumption
100mA Max.
Operating Temperature
0°C ~ 40°C
Storage Temperature
-20°C ~ 60° C
Dimensions & Weight
148mm (W) x 115mm (D) x 39.6mm(Height), 380g
█
NOTES
KVMs and related products should not be used for the control of extremely hazardous processes, like nuclear reactors, or patient monitoring systems. In
the event of a decision to use the products in these areas, the customer/distributor assumes the responsibility for the decision. Always read the manual
and do not use in areas of high dirt, water or condensation.
The SERVIS logo is a trademark of Fujitsu Component Limited and all other trademarks are the property of their respective owners.
!
"
#
$
%
&
'
(
)
Major Front Face Functions:-
!
Select switch(s) used to select each PC connected to the switch
"
Selection LED, which is lit when a certain PC is selected.
#
POWER LED, lit when a PC is connected
$
Low Power LED. If the keyboards you are using take more powe
r
than expected and the KVM switch needs more, this will light and an
external cable is required. (The KVM will self power if only PS/2
connections are made. Any USB connections will require power)
%
RESET. In the unlikely event of an error or lock up the KVM is reset.
&
DIP switch, used to select the required ‘hot key’ for switching
'
Shared USB ports for peripheral equipment (Cameras etc).
(
PS/2 Keyboard connector
)
PS/2 Mouse connector
Major Rear Face Functions:-
Monitor connector to the PC
Keyboard/mouse connector for dedicated cable from the KVM to the PC
USB connector to the host PC
Audio in sockets for connection to the host PC’s
Common Monitor cable to connect the KVM to the Monitor
Audio out, connected to PC speakers
DC 5V adapter input.