Filter
Top Products
- 16 -
Item SPARC M10-1 SPARC M10-4 SPARC M10-4S
eXtended
System
Control
Facility (*6)
External interface 2 XSCF-LAN ports
1 serial port
1 USB port
2 XSCF-LAN ports
1 serial port
1 USB port
2 XSCF-LAN ports
1 serial port
1 USB port
3 XSCF BB control
ports
1 XSCF DUAL control
port
Redundant
conguration
Not available Not available Supported (2 or more
building blocks (*3))
Active replacement Not available Not available Supported (only 2-BB
conguration or larger)
*1: None of the dimensions includes the sizes of protrusions.
*2: A redundant configuration applies only when 200 VAC is used.
*3: A single SPARC M10-4S in a building block configuration is referred to as a building block.
*4: Some PCIe card types do not support active replacement.
*5: The operating system is installed in the initial system state. For detailed software requirements, see the
Fujitsu M10/SPARC M10 Systems Product Notes.
*6: Firmware is built into the eXtended System Control Facility. This firmware is installed on the service proces-
sor in the XSCF unit in the initial system state. For details, see the Fujitsu M10/SPARC M10 Systems System
Operation and Administration Guide.
Model specifications (3/3)
Item Crossbar box
External
dimen-
sions (*)
Height 4U
Height x width x depth 174 mm x 440 mm x 740 mm
(6.9 in. x 17.3 in. x 29.1 in.)
Weight 40 kg
eXtended
System
Control
Facility
External interface 2 XSCF-LAN ports
1 serial port
1 USB port
19 XSCF BB control ports
1 XSCF DUAL control port
Redundant
conguration
Available (only between SPARC M10-4S units)
Active replacement Available
Crossbar connection interface - 2 crossbar units mounted
32 crossbar cable ports
- 3 crossbar units mounted
48 crossbar cable ports
Crossbar box specifications (1/2)