Filter
Top Products
Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC
®
Enterprise M5000 Page 8 / 38
9. Configuration Diagram of the Main Unit
* Areas indicated in blue show components belonging to the base units; those indicated in red show options (purchased
separately, but see also base unit description).
10. Hardware for M5000
• Motherboard
The motherboard carries CPU modules and memory modules. Four CPU modules (eight CPU chips) and eight
memory modules (64 DIMMs) can be mounted. The motherboard is part of the base unit.
• 1
st
I/O board (standard)
The I/O board has a connection to two Hard Disk Drive bays, one DVD Drive bay and one DAT Drive bay. It contains
two onboard LAN
*2
ports, four PCI Express slots and one PCI-X slot.
• 2
nd
I/O board (optional)
The 2
nd
I/O board has a connection to two Hard Disk Drive bays. It contains two onboard LAN
*2
ports, four PCI Express
slots and one PCI-X slot.
• System disk
Each partition requires at least one system disk for Solaris-installation. System disks can be realized in any of the
following ways. To improve system reliability it is recommended to duplicating (mirroring) the system disk.
A) Mount a Hard Disk Drive in a disk bay inside the server.
B) Ultra 320 SCSI cards, expansion file units together with external HDDs can also be used as system disks.
C) When using SAN Boot, fibre channel cards, RAID devices and system disks must be prepared. Use a disk in a
RAID device as the system disk. When installing the OS on the RAID device, you need to prepare another
installation server, or use one partition as an installation server using method A) above.
D) LAN Boot from other SPARC Enterprise Server is also possible.