Fujitsu MAB3091 Computer Drive User Manual


 
C141-E035-02EN E - 5
Table E.1 SCSI interface function specifications (4 of 8)
: Provided ×: Not provided
Item Specification
MODE SELECT (command) (15)
Page 3: Format parameter
Ο (24 B: Savable)
Number of tracks/zone
Ο (Not changeable)
Number of alternate sectors/zone
Ο (Changeable)
Number of alternate tracks/zone
Ο (Not changeable)
Number of alternate tracks/drive
Ο (Not changeable)
Number of alternate sectors/track
Ο (Not changeable)
Data byte length/physical sector
Ο (Changeable)
Interleave factor
Ο (No interleave)
Track skew factor
Ο (Not changeable)
Cylinder skew factor
Ο (Not changeable)
SSEC/HSEC (Soft Sector/Head Sector)
Ο (Not changeable)
RMB (Removable)
Ο (Not changeable)
SURF (Surface)
Ο (Not changeable)
Page 4: Drive parameter
Ο (24 B: Savable)
Number of cylinders
Ο (Changeable)
Number of heads
Ο (Not changeable)
“Write Precompensation” start cylinder
×
“Reduced Write Current” start cylinder
×
Drive step rate
×
Landing zone cylinder
×
RPL (Rotational Position Locking)
×
Rotational synchronization offset
×
Medium rotational speed
Ο (Not changeable)
Page 7: Verify error recovery
Ο (12 B: Savable)
EER (Enable Early Recovery)
Ο (Changeable)
PER (Post Error)
Ο (Changeable)
DTE (Disable Transfer on Error)
× (Specified value
ignored)
DCR (Disable Correction)
Ο (Changeable)
Retry count at verification
Ο (Changeable)
Correctable bit length
Ο (Not changeable)
Recovery processing time restriction
Ο (Not changeable)
*1 Fujitsu-specific function
Command
(Group 0)