Fujitsu MAP3367NP Computer Drive User Manual


 
C141-E166 4-5
Figure 4.4 Mounting frame structure
(2) Limitation of side-mounting
Mount the IDD using the 4 screw holes at the both ends on the both sides as shown in Figure 4.5.
Do not use the center hole by itself.
In case of using the center hole, it must be used in combination with 2 holes on both ends.
(Total 6 screws for 6 holes enclosed)
Figure 4.5 Limitation of side-mounting
(3) Limitation of bottom-mounting
Use all 4 mounting holes on the bottom face.
4
3
2
1
Use four holes (No.1-4) to mount.
Holes for
mounting screw.
Holes for mounting screw.
Do not use these holes
5.0 or less
5.0 or less