Fujitsu MAT3147NC/NP Computer Drive User Manual


 
4-16 C141-E201
(5) External operator panel connector Signals
a. 16-bit SCSI –ID3, –ID2, –ID1, –ID0: Input signals (CN1-A1, A3, A5, A7 pin and CN2-02,
04, 06, 08 pin)
These signals are used for providing switches to set the SCSI ID of the IDD externally. Figure
4.20 shows the electrical requirements. For the recommended circuit examples, see Subsection
4.3.4.
Figure 4.20 16-bit SCSI ID external input