Fujitsu MAW3147NC/NP Computer Drive User Manual


 
C141-E226 3-1
CHAPTER 3 DATA FORMAT
3.1 Data Space
3.2 Logical Data Block Addressing
3.3 Defect Management
This chapter explains data space definition, logical data block addressing, and defect management on the
HDD.
3.1 Data Space
The HDD manages the entire data storage area divided into the following three data spaces.
User space: Storage area for user data
Internal test space: Reserved area for diagnostic purposes
System space: Area for exclusive use of the HDD itself
The user space allows a user access by specifying data. These spaces can be accessed with the
logical data block addressing method described in Section 3.2. The internal test space is used by
Read/write test of self-diagnostics test, but user can’t use direct access. The system space is
accessed inside the HDD at power-on or during the execution of a specific command, but the user
cannot directly access the system space.
3.1.1 Cylinder configuration
The HDD allocates cylinders to the user space, Internal test space, and system space. Figure 3.1 is
the cylinder configuration.
Spare areas (alternate areas) for defective sectors are provided in the user space. Several sectors in
the last track of one cell and the last cylinder (alternate cylinders) in one zone are allocated as
alternate areas according to the user's assignment (MODE SELECT command). See Subsection
3.1.2 for details.