Filter
Top Products
5
MB3842/MB3845
■
ABSOLUTE MAXIMUM RATINGS
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■
RECOMMENDED OPERATING CONDITIONS
* : For C
SS
, R
LIM
settings, see “TYPICAL CHARACTERISTICS” and “FUNCTIONAL DESCRIPTION”.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device's electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
Parameter Symbol Condition
Rating
Unit
Max. Min.
Input voltage V
IN
— –0.3 7.0 V
ENABLE voltage V
EN
— –0.3 7.0 V
Switch current I
SW
——1.8A
Power dissipation P
D
Ta = +85°C — 216 mW
Storage temperature T
STG
— –55 +125 °C
Parameter Symbol Condition
Value
Unit
Min. Typ. Max.
Input voltage V
IN
—2.55.05.5V
ENABLE voltage V
EN
V
EN
≤ V
IN
0—5.5V
Switch current I
SW
V
IN
= 2.5 V to 5.5 V — — 0.6 A
SS pin capacitance C
SS
* — — — 10 nF
OC sink current I
OCS
V
IN
= 5.0 V, V
OC
= 0.4 V 2.0 5.0 — mA
Current limit
resistance
R
LIM
*
V
IN
= 5.0 V (I
SW
= 0.6 A) 1.4 2.0 2.6 kΩ
V
IN
= 5.0 V (I
SW
= 0.1 A) 3.6 6.2 9.1 kΩ
Operating
temperature
T
OP
— –20 — +85 °C