Filter
Top Products
AN706-00044-1v0-E
5.5 Example of total operating Procedure
This chapter introduces the operating method of GUI.
5.5.1 Hardware preparation
Before operating GUI, prepare hardware according to the following procedure.
1. Install the FTDI driver (Only once)
2. Prepare the hardware environment
3. Connect the wires among the hardware board, FTDI device, PC and so on.
4. Turn on the Hardware power.
5.5.2 GUI software operating step
The following part is an example of GUI operating method.
(1) PC and hardware communication Connect:
First, click Connect button in Main Window to connect PC with hardware (1 in
Figure
5-10). If connection succeeds, the color of Connect button changes from red to
green. The button text changes from Disconnect to Connected.
25