Filter
Top Products
3.4 Jumper Settings
C141-E057-02EN 3-11
3.4.2 Factory default setting
Figure 3.10 shows the default setting position at the factory.
Figure 3.10 Factory default setting
3.4.3 Master drive-slave drive setting
Master device (device #0) or slave device (device #1) is selected.
(b) Slave drive(a) Master drive
Open
Open
Short
Open
A
1 C
BD
2
BD2
AC1
Figure 3.11 Jumper setting of master or slave device
Note:
Pins A and C should be open.
Open