Filter
Top Products
5.3 Host Commands
C141-E104-02EN 5-39
Table 5.4 Information to be read by IDENTIFY DEVICE command (8 of 8)
'00' = Reserved
'01' = Using a jumper.
'10' = Using the CSEL signal.
'11' = Other method.
Bit 0: Reserved
*16 WORD 128
Bit 15-9: Reserved
Bit 8: Security level. 0: High, 1: Maximum
Bit 7-6: Reserved
Bit 5: 1: Enhanced security erase supported
Bit 4: 1: Security counter expired
Bit 3: 1: Security frozen
Bit 2: 1: Security locked
Bit 1: 1: Security enabled
Bit 0: 1: Security supported
(13) IDENTIFY DEVICE DMA (X’EE’)
When this command is not used to transfer data to the host in DMA mode, this
command functions in the same way as the Identify Device command.
At command issuance (I/O registers setting contents)
1F7
H
(CM)11101110
1F6
H
(DH) x x x DV xx
1F5
H
(CH)
1F4
H
(CL)
1F3
H
(SN)
1F2
H
(SC)
1F1
H
(FR)
xx
xx
xx
xx
xx