Filter
Top Products
Interface
5-72 C141-E120-02EN
Self-test
execution status
Meaning
0 Self-test has been completed normally or has not been
executed.
1 Self-test has been stopped by the host computer.
2 Self-test has been suspended by hard or soft reset.
3 Self-test has been aborted by a fatal error.
4 Self-test has been completed abnormally by an unknown
meaning.
5 Self-test has been completed abnormally by write test.
6 Self-test has been completed abnormally by serbo test.
7 Self-test has been completed abnormally by read test.
8 to 14 Reserved
15 Self-test is in progress.
•
Off-line data collection capability
Indicates the method of off-line data collection carried out by the drive. If
the off-line data collection capability is 0, it indicates that off-line data
collection is not supported.
Bit Meaning
0 Indicates that Execute Off-Line Immediate is supported.
1 Vendor unique
2 Indicates that off-line data collection being executed is
aborted when a new command is received.
3 Indicates that supports off-line read scan function.
4 Indicates that supports self-test function.
•
Failure prediction capability flag
Bit 0: The attribute value data is saved to a media before the device enters
power saving mode.
Bit 1: The device automatically saves the attribute value data to a media
after the previously set operation.
Bits 2 to 15: Reserved bits
•
Error logging capability
Bit 0: Indicates that error logging function.
Bits 1 to 7: Reserved bits