Filter
Top Products
Interface
• SLEEP
• DEVICE CONFIGRATION RESTORE
• DEVICE CONFIGRATION FREEZE LOCK
The following is the protocol for command execution without data transfer:
3) Command execution is completed.
• WRITE UNCORRECTABLE EXT
1) The device receives a non-data command with the RegHD FIS.
2) The device executes the received command.
4) The device reports the completion of command execution by sending to the
host the RegDH FIS with 1 set in the I bit.
Device
Host
RegHD
RegDH
Figure 5.13 Non-data command protocol
5-176 C141-E269