Fujitsu MHZ2200BJ Computer Drive User Manual


 
Interface
Table 5.33 Information to be read by IDENTIFY DEVICE command (2/3)
Word Value Description
62 X '0000' Reserved
63 X 'xx07' Multiword DMA transfer mode *9
64 X '0003' Advance PIO transfer mode support status *10
65 X '0078' Minimum multiword DMA transfer cycle time per word: 120 [ns]
66 X '0078' Manufacturer's recommended DMA transfer cycle time: 120 [ns]
67 X '0078' Minimum PIO transfer cycle time without IORDY flow
control: 120 [ns]
68 X '0078' Minimum PIO transfer cycle time with IORDY flow control: 120 [ns]
69-74 X '0000' Reserved
75 X '001F' Queue depth *11
76 X '070x' Serial ATA capabilities *12
77 X '0000' Reserved for Serial ATA
78 X '004C' Support of Serial ATA function *13
79 X '00xx' Valid of Serial ATA function *14
80 X '01F8' Major version number: ATA8-ACS *15
81 X '0042' Minor version number: ATA8-ACS Revision 3f
82 *16 Support of command sets *16
83 *17 Support of command sets *17
84 *18 Support of command sets/function *18
85 *19 Valid of command sets/function *19
86 *20 Valid of command sets/function *20
87 *21 Default of command sets/function *21
88 X 'xx3F' Ultra DMA transfer mode *22
89 Set by a device Security Erase Unit execution time (1 LSB: 2 min.) *23
90 X '0000' Enhanced Security Erase Unit execution time (1 LSB: 2 min.)
91 (Variable) Advance power management level
92 (Variable) Master password revision
93 X '0000' COMRESET Result
94 (Variable) Acoustic Management level *24
95-99 X '0000' Reserved
100-103 X 'xx' Total number of sectors accessible by users in the 48-bit LBA mode *2
*25
5-106 C141-E280