Filter
Top Products
C141-E110-02EN
3 - 16
(3) Special jumper settings
(a) 2.1 GB clip (Limit capacity to 2.1 GB)/33.8 GB clip (Limit capacity to 33.8GB)
If the drive cannot be recognized by system with legacy BIOS’s which do not allow single
volume size greater than approximately 2.1 GB, the following jumper settings should be
applied.
This jumper settings is also used as the 33.8 GB clip for MPG3409AT. (MPG3409AT does
not have the 2.1 GB clip feature.)
Slave DeviceMaster Device Cable Select
8642
97531
8642
97531
8642
97531
Model No. of cylinders No. of heads No. of sectors Capacity
MPG3102AT 4,092 16 63 2.1 GB
MPG3153AT 4,092 16 63 2.1 GB
MPG3204AT 4,092 16 63 2.1 GB
MPG3307AT 4,092 16 63 2.1 GB
MPG3409AT 16,383 16 63 33.8 GB
(b) Slave present
If the slave device does not use the Device Active/Slave Present (DASP–) signal to indicate
its presence, the device is configured as a Master with slave present when the following
jumper settings is applied.
Slave present
8642
97531