Filter
Top Products
5
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field Options Default Description
Type:
n
Auto
n
None
[Auto] Selects the Serial ATA/IDE device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None is
selected, all of the following Set-up items do not appear.
LBA Format Logical Block Addressing (LBA)
Total
Sectors:
--- --- The total number of sectors on your hard disk
Maximum
Capacity:
--- --- The maximum capacity of your hard disk
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Primary Master [TOSHIBA MK2003GAH -(PM)]
Type: [Auto]
LBA Format
Total Sectors: 39062520
Maximum Capacity: 20000MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
Transfer Mode: [Multiword DMA 2]
Ultra DMA Mode: [Disabled]
Main Menu