Filter
Top Products
24
LifeBook P Series BIOS
Standby
Timeout:
• Off
• 1 to 16
Minutes
[4 Minutes] Sets the length of time without any user input device activity
before the CPU is set to half speed and the display and the hard
drive are turned off. If you choose a factory combination of param-
eters this field will display the setting. If you choose to customize
the parameters you will be able to set it yourself.
Auto
Suspend
Timeout:
• Off
• 5 to 60
minutes
[15 Minutes] Sets the length of time without any I/O activity before your note-
book goes into Suspend mode. If you choose a factory combina-
tion of parameters this field will display that setting. If you choose
to customize the parameters you will be able to set this yourself.
Off has no inactivity suspension.
Suspend
Mode:
• Suspend
• Save to Disk
[Suspend] Sets the form of suspension state. If you choose Suspend, you will
suspend operation with power to system memory, and everything
else powered down or in a very low power state. If you choose
Save-to-Disk your notebook will save all of system memory and
the operating parameters to the hard drive before turning your
notebook to the pseudo-off condition.
Auto Save
to Disk:
• Off
• After 1 Hour
[Off] When set to “After 1 Hour”, your notebook will
automatically save all system memory and the operating
parameters to the hard drive and go to pseudo-off if the notebook
is left in Suspend mode for more than an hour.
Resume
On
Modem
Ring:
• Off
• On
[Off] Sets whether or not to Resume from a suspension state when a
message is received by telephone line. This feature will not operate
if the Save-to-Disk mode is enabled. This feature applies to internal
and external modems.
Resume
On Time:
• Off
• On
[Off] Sets whether or not to resume from a suspension state at a
designated time. This feature is available from either the Suspend
or Save-to-Disk modes.
Resume
Time:
–— [00:00:00] Sets the designated time, on a 24-hour clock, when the notebook
is to automatically resume operation from the Suspend state. The
format of the clock setting is hours:minutes:seconds. Each segment
of the time is set separately, either by incrementing or by typing in
the numbers. You move between the segments with the [Tab] key
or the [Shift]+[Tab] keys. This only applies when Resume on Time is
set to On.
Advanced
Features:
–— –— When selected, opens the Advanced Features submenu which
allows setting additional power saving parameters.
Table 16: Fields, Options and Defaults for the Power Menu
Menu field Options Default Description
Pauling 2 BIOS.fm Page 24 Thursday, June 6, 2002 9:11 AM