Fujitsu P42VCA30W Projector Accessories User Manual


 
E-8
Note
Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
Reference
See P. E-12–E-13 for how to adjust the picture size and position.
* Functions may not be available with some models and some device options.
Set the OFF/STD-BY switch at
the bottom of the display to STD-
BY
.
The power indicator lamp turns red.
Press on the remote
control.
When you do so, the power indicator lamp turns
green.
Press or to select a
desired input mode.
BASIC OPERATIONS
TURNING ON THE POWER
Press when the power is ON.
The power indicator lamp turns red.
TURNING OFF THE POWER
1
2
3
03.11.12, 0:55 PMPage 8