Filter
Top Products
8
LifeBook P7000 Notebook BIOS
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
Esc] key or use the cursor keys to go to the Exit menu.
If you wish to move to another menu, use the cursor keys.
Sectors: • A number
between 0
and 63
–— This item appears only when the type is identified as Auto or
Hard Disk. When Hard Disk is selected, you can change the
value. This field is changed by incrementing (pressing the [Spa-
cebar]) or by typing in the number.
Maximum
Capacity:
• Display only –— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
Multi-Sector
Transfers:
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
[Disabled] This option cannot be changed when Auto is selected. Specify
the number of sectors per block for multiple sector transfer.
LBA Mode
Control:
• Disabled
• Enabled
[Disabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
Transfer
Mode:
• Standard
• Fast PIO 1
• Fast PIO 2
• Fast PIO 3
• Fast PIO 4
• Multiword DMA 1
• Multiword DMA 2
[Standard] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option can-
not be changed when Auto is selected. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO
3, and set to mode 2 for Fast PIO 4 / DMA.
Ultra DMA
Mode:
• Disabled
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
[Disabled] Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option can-
not be changed when Auto is selected.
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field Options Default Description