Filter
Top Products
E-16
Select the OFF/STD-BY switch
at the STD-BY
of the display.
When you do so, the power indicator lamp turns
red.
(This applies only to 50”display.)
Press on the remote
control.
When you do so, the power indicator lamp turns
green.
Press or to select a
desired input mode.
BASIC OPERATIONS
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
TURNING ON THE POWER
Press when the power is ON.
The power indicator lamp turns red.
TURNING OFF THE POWER
1
2
3
Press to increase the volume.
Press
to reduce the volume.
Any value between 0 and 40 can be selected.
* “No Audio” appears if you press
or after you have
selected “No Audio” for “Audio Input”. (See P. E-37.)
* Note that the volume level remains stored even when you
turn OFF the power.
ADJUSTING THE VOLUME
When the volume adjustment button is pressed