System configurator and order-information guide
C
PRIMERGY R450 Status 2003-10-24
Section
VII
SCSI-/Fibre-channel controller
A. on-board SCSI Controller for internal hard disks
2-channel U160-SCSI controller on-board; included as standard
The following cabling is standard, if no Disk Array Controller is used
1. Channel A of the U160 controller is connected to the 1st backplane for 3 HDs
2. Channel B of the U160 controller is connected to the 2nd backplane for 3 HDs
S26361-F2287-E15
This interface is only configurable if a RAID Controller
External on-board SCSI Interface besides the 0-channel RAID Controller is used
Cable and external See section Disk Array Controlller
connector interface
max. 2x per system for external
B. SCSI - controller for external hard disk extensions and external peripheral devices.
while stocks last
SNP:SY-F1722E1-P S26361-F2399-E1
Controller for the connection of a EMC
SCSI Controller UW, DE SCSI U160 Controller
Symmetrix (only available as option)
Adaptec 2944UW (HBA) Adaptec SCSI card 29160 Supported only in Microsoft Windows
1 channel differential-ended 1 channel: LVD+Fast/Ultra (decoup.)
NT and Windows 2000 operating
max. 40MB/s; without cable LVD con. for HD, withoud cable
systems
4x
32/33 PCI, min. 170mm
Fast/Ultra con. access. drives
int: LD50 + HD68, ext: HD68(S)
64/66 (32/33) PCI, min. 180mm
SW: int: Fast 50-pin or Ultra HD68
max. 2x per system
+ LVD HD68; ext: HD68(LVD)
SW:
max. 2x per system
5x
C. Fibre Channel controller for subsystems and SAN
while stocks last while stocks last
SNP:SY-F2244E1-P SNP:SY-F2244E2-P
1GBit/s FC Controller 1GBit/s FC Controller
Qlogic Qlogic
QLA 2200 QLA 2200F, full height braket
1 Channel 1GBit/sec FC Controller 1 Channel 1GBit/sec FC Controller
CU (copper) Interface MMF(Multimode Fibre) Interface
incl. SW and description (Ger/US) incl. SW and description (Ger/US)
PCI 64Bit / 66MHz, 175mm PCI 64Bit / 66MHz, 175mm
3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling
4x
max. 4x per system max. 4x per system
while stocks last
S26361-F2843-E1 S26361-F2624-E1 suitable for
2GBit/s FC Controller 2GBit/s FC Controller
64Bit/66MHz
Emulex Emulex
PCI-Slot
LP9802 LP9002L
1 Cannel 2GBit/sec FC Controller 1 Channel 2GBit/sec FC Controller Attention
LC Interface for 50um Fiber LC Interface for 50um Fibre 2GBit/s FC Controller
PCI 64Bit / 133MHz, 170mm PCI 64Bit / 66MHz, 170mm require other interface
3.3V and 5V tolerant signaling 3.3V and 5V tolerant signaling connectors for the
max. 4x per system max. 4x per system
optical cables than
freigegeben 1GBit/s fibre channel.
SNP:SY-F1826L1-P
Supported only in Microsoft
FC Ctrl for EMC2 Attachment
Windows NT and
Emulex LP8000
Windows 2000 operating There are other components
1 channel 100MB/s systems. such as switches, GBICs
MMF (Multimode Fibre) Interface or cables which can be
Connector: Duplex SC Controller for the connection ordered for fibre channel SAN
without cable, order seperately of a EMC Symmetrix, FibreCAT attachments. (see price list)
incl. SW a. description (Ger/US) (only available as option)
PCI 64Bit/33MHz controller
max. 4x per system
All controllers for the connection of external storage systems are delivered without cables
to be continued For the configuration of external cabling see the configurator for external storage systems
on next page
D
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
8 of 12