Fujitsu TX150 S3 Server User Manual


 
2 Options Guide U41604-Z156-1-76
Extensions and conversions Introduction
The Technical Manual for the system board D1979 (PDF available on the
ServerBooks CD supplied)
The “BIOS Setup” manual (PDF available on the ServerBooks CD supplied)
The “PRIMERGY ServerView Suite - ServerStart” manual (printed copy
always supplied with the server, and available as PDF file on the ServerBooks
CD supplied)
The “Global Array Manager Client Software User’s Guide” (PDF available on
the ServerBooks CD supplied)
The “Integrated Mirroring User’s Guide” (PDF available on the ServerBooks
CD supplied)
I You can order a supplementary ServerBooks CD by sending an e-mail to
the following address, quoting your server data:
Reklamat-PC-LOG@fujitsu-siemens.com
Further sources of information:
Technical Manual on the relevant rack
Manual on the monitor
Manual on ServerView Server Management
Manual on the RemoteView Remote Test and Diagnostics System
Documentation on boards and drives
Documentation on your operating system
Information files on your operating system
(see also “Related publications” on page 79)
1.2 Extensions and conversions
Extension of the main memory
The four slots for the main memory are suitable for DDR1 333/400 MHz (unbuf-
fered) SDRAM memory modules. The organization in two memory banks, 1 and
2, permits rapid memory access with two-way interleaving.
If the memory modules are populated in pairs, each pair must consist of
identical memory modules (2-way interleaved mode).
Additional SATA hard disk drives
In the SATA version four bays are available for SATA hard disk drives.