Filter
Top Products
Elite-16 PF E Manual
- 4 -
InstallatIon:
unpackIng
Before unpacking your unit, inspect the carton
for any obvious severe damage to the box and
internal protective materials. If internal damage
is likely, contact the carrier who delivered the
unit before proceeding with unpacking. If, after
unpacking, shipping damage is evident, contact
the carrier. Save all shipping and packing
materials. You may need them if you should
ever have to return the unit to the factory for
servicing.
The box should contain the Elite-16 PF E unit,
detachable AC cord, rack mount kit, owner’s
manual, and warranty registration card. If
anything is missing, please contact your local
authorized Furman Customer Service Center.
Fill out and return your warranty registration
card. Registration is recommended because
it can be used to establish whether the unit is
within the warranty period should your original
ownership documents be lost, and it assists us
in informing you about upgrades or other vital
information.
saFety InFormatIon -
WarnIngs
Please read and observe all of the safety and
operating instructions before the Elite-16 PF E
is operated. Retain these instructions for future
reference.
Do not disassemble or modify in any
way. No user-serviceable parts inside
Keep away from moisture and avoid
excessive humidity
Do not allow liquids or foreign objects to
enter the unit
◊
◊
◊
The Elite-16 PF E should be serviced
by qualied service personnel when:
The power supply cord or plug has been
frayed or cut.
Objects have fallen or liquid has spilled
into the unit.
The Elite-16 PF E has been exposed to
rain or other moisture.
The Elite-16 PF E does not appear to
operate normally, or exhibits a marked
change in performance.
The Elite-16 PF E has been dropped, or
the enclosure damaged.
The Elite-16 PF E requires that a safety ground
be present for proper operation. Any attempt
to operate the Elite-16 PF E without a safety
ground is considered improper operation and
may invalidate the warranty (this does not apply
to countries without a grounded mains outlet).
poWer source
The power source to which the Elite-16 PF E
is connected should be adequate for use at 16
Amps. The Elite-16 PF E will operate with a10
Amp service outlet; however, nuisance tripping
at the circuit breaker panel may result if the
systems continuous current draw exceeds 10
Amps.
placement
The Elite-16 PF E is manufactured with four
rubber feet for placement on any table, cabinet,
shelf, or oor. These rubber feet may be
easily removed with a standard Philips screw
driver when rack mounting adjacent to other
components. Placement or proximity to other
components is not critical, and the Elite-16 PF
◊
◊
◊
◊
◊
◊